FOOD GRADE PENETRATING OIL
For use in the food & beverage industry on fasteners seized by heat, corrosion, over-tightening and contamination.
• NSF H1 registered (No.140260)
• Spray on, allow to penetrate, and remove seized fasteners without damaging the head, thread or risk shearing
• Does not contain silicone
• Safe for use on all metals
Threadlocking | vibration protection | classified as non-hazardous| DVGW approval · medium viscosity · medium strength · disassembly with normal tools Threadlocking vibration protection classified as non-hazardous DVGW approval medium viscosity disassembly with normal tools
Space-saving thanks to locking mechanism • automatic wire stripper for all common stranded and solid conductors (0.2 – 6.0 mm²) • very easy to operate • integrated, well-accessible side cutter up to 2 mm Ø • precise working thanks to adjustable length stop (5 – 12 mm) • space-saving due to locking of the stripper […]
WEICON Silicone Spray is a sliding and release agent as well as a preservative and care product for plastic, rubber and metal. The spray provides a durable separating film and good surface properties and is temperature-resistance up to +250°C (+482°F). Silicone Spray prevents the formation of adhesive residues on presses and guides, prevents products from […]
All-purpose use | fast reliable WEICON Compressed-Air Spray can be used wherever dust cannot be easily removed by conventional methods and on parts which are difficult to reach. It allows dry and contact-free cleaning of inaccessible corners and sensitive surfaces. Compressed-Air Spray can be used on HiFi and video devices (e.g. modules, circuit boards, magnetic […]
Adheres to wet and moist surfaces | ISEGA-certified WEICON Aqua-Flex is strong, paintable (wet-on-wet), has an outstanding resistance to ageing and is resistant to weathering, UV rays as well as fresh and salt water. It is free of silicone, isocyanate, halogens and solvents. The product as an ISEGA certificate and can be used as an […]
General purpose high strength metal and composite bonder. Minimal surface prep. Rapid fixture time.
Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets To Increase Reliability
Protects electrical connections and wiring from salt, dirt and corrosion
Permatex 80345 White Lithium Grease 1.5 Oz Tube WL-9. These Tried And True All-purpose.
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges
?Copper-free, this lubricant is for use under conditions of extreme pressure and temperature, with stainless steel, titanium and nickel alloys.?
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world’s strongest bond for your projects
Able to withstand continuous heat up to 450 degrees Fahrenheit or intermittent heat up to 500 degrees; 3 times stronger at high temperatures than conventional epoxy putties Great for exhaust manifolds, tail pipes, mufflers, engine blocks, duct work, machinery, and other high temperature projects in need of a bond or a seal Easy to Use; […]
J B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more J B Weld WaterWeld is certified by the NSF and is safe for contact with potable […]
J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water Cure And Set Time: After Kneading The Two Part Formula Together By Hand, […]
J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water Cure And Set Time: After Kneading The Two Part Formula Together By Hand, […]
Great for rigid and semi flexible plastic, ABS, PVC and CPVC pipes, automotive trim, bumpers and more
Hand mixable, fast setting epoxy putty that forms a durable bond to most major plastic types Great for rigid and semi flexible plastic, ABS, PVC and CPVC pipes, automotive trim, bumpers and more Sets in 25 minutes, Cures Off White in 3 hours does not adhere to polyethylene, Polypropylene or some other plastics Once cured, […]
CURE AND SET TIME: After mixing at a ratio of 1:1, it takes 5 minutes to set and 1 hour to cure. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil.
J-B WELD KWIKWELD: A fast setting version of The Original Cold Weld two part epoxy system that provides strong, lasting repairs to multiple surfaces Perfect for DIY household, automotive, marine, craft repair and much more J-B Weld KwikWeld now comes in a syringe allowing for an easy 1:1 mix ratio The unique syringe has a […]
J-B WELD MARINEWELD: A specially formulated two part adhesive & sealant that provides a strong and flexible bond that is waterproof, and chemical & UV resistant. J-B Weld MarineWeld comes in a syringe allowing for an easy 1:1 mix ratio
At room temperature, J-B Weld sets in 4-6 hours to a dark grey color.
J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy […]
J B WELD PLASTICBONDER Tan: A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J B Weld PlasticBonder now comes in a syringe allowing […]
J B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl. J B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re sealable cap […]
Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is […]
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
RTV SILICONE SEALANT & ADHESIVE: Is a general purpose RTV (Room Temperature Vulcanized) Silicone, designed for sealing and bonding uneven surfaces
WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world’s strongest bond for your projects.
Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work. With Each Product We Innovate, We Continue To Provide The World’S Strongest Bond For Your Projects.
RADIATORWELD: Our radiator and plastic tank repair kit has all you need for making professional quality, permanent repairs with state of the art components and easy to follow instructions.
Bondloc B510 is a high temperature resistant anaerobic sealant that cures when confined in the absence of air between close-fitting metal parts.
Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates.
Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics.
Specifically developed to protect electric motors. Insulates and protects all types of electrical systems against high humidity. Highly visible red varnish. Dries rapidly: touch dry in 15 minutes, handling time in 40 minutes, and full cure within 48 hours. When cured, the film conforms to BS 5629 type 1.1
POWERFUL PAINT REMOVER A highly effective solution to the difficult problem of removing graffiti and old paint. • Rapidly softens existing paint for easier removal prior to repainting with Ambersil Acrylic Paint or Galva Colour • For use on hard, non-porous surfaces. Test substrate compatibility prior to use • Softens acrylic paint in 3 minutes, […]
FOOD GRADE ELECTRICAL CONTACT CLEANER Designed for electrical component maintenance in the food industry, particularly for on-line production electrics and similar delicate equipment. • NSF K2 Registered (No.139627) • Use to remove grime and contamination from PCB’s and electronics • Reduces voltage drop due to contamination • Non-corrosive and non-conductive
Use on all brakes and clutches to remove dust deposits, oil, grease, and other contaminants. Also removes anti-corrosion coatings on new brake discs prior to fitting. • Reduces disc brake squeal and clutch chatter • Can be used as a general purpose degreaser
Our team is always here to provide you with the best solutions for all your tech needs. Feel free to drop your queries at any hour of the day!
© 2023 Technomech Trading LLC
For each tool, bahco develops the best solution to work at height, approved according to Drops practices.
Ask anything about our products, pricing, features, and so on:
Reviews
There are no reviews yet.